What kind of wood is used in Stihl Timbersports

The STIHL TIMBERSPORTS® competition wood for almost all disciplines is taken from fast growing poplar trees, which are cultivated on certified industrial plantations and are 100% sustainable. The only exception is the wood used for Single Buck – for this discipline, the athletes take white pine instead of poplar.

What is the stock saw in STIHL TIMBERSPORTS?

The STIHL MS 661 C-M stock saw is a new STIHL standard chain saw. Powered at approximately 7.3 HP, its displacement is 91.1 cc and it weighs 7.4 kg. The MS 661 C-M is equipped with M-Tronic all-electronic engine management.

What kind of AXE do lumberjacks use?

In axe racing competitions, they generally use softwoods, and Hults Bruk axe models excel at chopping through softwoods. It has a 4.25 inch cutting edge, a 32-inch handle, and is hand-forged from Swedish steel in a foundry that has been operating since 1697.

What type of wood is used in wood chopping?

Different types of woods Woods cut in America include white pine, alder, aspen frozen wood and cotton wood.

How many events are there in the timbersports?

U.S. STIHL TIMBERSPORTS® RETURNS TO CBS SPORTS The season follows over 70 men and women athletes from across the country through qualifying rounds, and ultimately to the U.S. Championships, held in Little Rock, Ark. In total, 16 episodes capture all the saw-screaming, chip-flying action.

Do lumberjacks use springboards?

That tool is the Springboard, one of the simplest but most important tools in a competitive lumberjack sports athlete’s gear stash. The springboard was first made for working in the woods. … One end of the springboard is a flat, wooden board.

What is an underhand chop?

The Underhand Chop is one of the most thrilling TIMBERSPORTS® disciplines to watch – it’s the one most likely to make first-time watchers of the sport wince too. Why? Competitors stand on a horizontally placed poplar log and swing an axe between their feet to cut the block of wood in two!

What woods not to use for cutting boards?

I would avoid open-pored woods like ash and red oak, which will be harder to keep clean from food stains. Pine might impart a resinous taste, and it’s soft so will show cutting scars from knives more easily than a harder wood like maple.

What is a racing AXE?

What is a racing axe? A racing axe is a custom-made axe for chopping fresh, knot-free white pine during Timbersports events. They comprise of a specially made steel head which is hand sharpened to a razor-sharp edge and a 31inch long hickory handle.

Can you use cedar for a cutting board?

Red cedar is the most common cedar type that use to make cutting boards. Why red cedar is so special than other types of cedar woods. Because red cedar is beautiful with fine even texture and cutting boards are smooth, soft and most importantly, most of Red cedar cutting boards are safe for food.

Article first time published on

Can oak be used for a cutting board?

For you tree enthusiasts, you may recognize that oak is a hardwood, but is not often used in cutting boards. The reason is that oak, while hard, has very large pores. When these pores are cut through they are visible to the naked eye.

What do lumberjacks cut wood with?

Chainsaws, harvesters, and feller bunchers are now used to cut or fell trees. The tree is turned into logs by removing the limbs (delimbing) and cutting it into logs of optimal length (bucking).

What do lumberjacks carry?

• Lumberjack Axes.
• Stock Chainsaws (MS 661)
• Hot Saws (Custom Racing Chainsaws)
• Crosscut Lumberjack Saws.
• Protective Equipment.
• Other Tools.

Where are Stihl axe heads made?

The Head. The head of this model is 600g and made in Italy.

Where is Stihl Timbersports 2021?

STIHL TIMBERSPORTS® Individual World Championship 2021 The event will take place behind closed doors at the Motorworld Munich in Germany.

Who won 2020 Stihl Timbersports?

Ferry Svan dominates from start to finish Swedish athlete Ferry Svan dominated from start to finish, recording no fewer than four personal bests on route to winning the 2020 STIHL TIMBERSPORTS® Four Nations Cup at Bavaria Film Studios, …

How much is Stihl worth?

In fiscal year 2020, the STIHL Group achieved a sales revenue of 4.58 billion euros. This represents a growth of 16.5 percent compared to the previous year (2019: 3.93 billion euros).

What are lumberjack competitions called?

Modern Lumberjack Sports Today, these lumberjack competitions (also called logging sports, timbersports, or woodsman teams) bring in huge audiences (both live and televised) to see their amateur, collegiate, and professional competitors.

How long is the log in the springboard event?

Using a five-pound single-bit axe, competitors chop through a vertical standing aspen log 12 inches (300 mm) in diameter and 28 inches (710 mm) long. Timing begins on the “go” signal and ends when the log is severed.

What is a Tuatahi?

The name “Tuatahi” (pronounced Two-Ah-Tah-Hee), has a Maori meaning of “Number One” or “The Best”.

How do you make a fake axe for Halloween?

You can use a cardboard tube or a 24-inch portion of a broomstick or tool handle in place of a wooden ax handle for a child’s fake ax. A thin foam pool noodle will also work. Instead of cardboard, use sheets of craft foam to make the ax head.

Why did lumberjacks use springboards?

Springboards were an innovation that allowed loggers to more easily fell trees with a flared base, such as firs. Notches were cut into the tree above the base; the logger then wedged in the springboard, on which he stood to chop and saw the tree down.

Can you use purple heart wood for a cutting board?

Purple Heart is used all over the world as an exotic wood for cutting boards and many other applications. … The wood is safe for use and doesn’t cause any allergies or reactions when used for a cutting board.

Is walnut or maple better for cutting boards?

1. Maple. Both soft and hard maple make for excellent cutting surfaces. But hard maple (1,450 lbf on the Janka hardness scale) is the industry standard among cutting board makers: It’s more scratch- and impact-resistant than beech, teak, or walnut but not so hard that it will dull your knives.

How thick should a cutting board be?

In terms of thickness, professional grade rubber boards are thinner and lighter, typically between ½- to 1-inch thick, while a well-crafted wooden board should be anywhere from 1 ¼- to 2-inches thick. Wessel says that for an end-grain cutting board he advocates for at least 2 inches of thickness.

What is the best wood for a cutting board?

Dense hardwood lumber with a closed grain like maple, walnut and cherry are among the best cutting board materials. The choice of wood should be free of warps, have a flat surface and doesn’t have any blemishes or excessive knots on the surface. The ideal cutting board thickness should be 1 1/4 to 2 inches.

Can juniper wood be used for cutting boards?

The mini juniper wood cutting board can be used as a cutting and serving board, adding an extra charm in how you present your food! Use it for small finger foods, lemons, strawberries, cheeses & serving mini toasts with peanut butter and jam! Products made from juniper wood aren’t just beautiful!

Can you use poplar wood for cutting board?

Poplar isn’t good for cutting boards. Poplar is too soft and porous for heavy cutting uses. Because of being highly porous, poplar wood easily sucks up bacteria and is not good for cutting boards that contact with foods regularly. Cutting marks from the knife will be very deep and hard to clean.

Which is harder maple or walnut?

Walnut is a softer wood than Maple. The benefit of this is that a knife will be much less likely to dull when using this wood, but there is a tradeoff since the softer wood is easier to scratch or dent. Its medium to large pores offer some resistance to bacteria and moisture but not as much as Maple.

Does black walnut make a good cutting board?

Similarly, walnut is another hardwood that’s an excellent choice in the kitchen. Its dark color is one of its main appeals, and although it’s softer than maple it will still hold up well over time. Walnut falls in the “just right” category of hardness that’s perfect for both board and knife maintenance.

Does walnut make good cutting boards?

A walnut board will work exceptionally well when dicing, slicing, and cutting cooked food. It is also great for cutting meat, bread, vegetables, herbs, and fruits. You can use one side for cutting meat, and the other for fruits and vegetables.