What is the depth of a dresser

A standard dresser has between six and nine drawers, is around waist tall (26″ – 44″), is 36″ – 60″ wide, and is 16″ – 20″ deep. However, these can vary and you should choose an option that works best in your bedroom.

What is the average depth of a dresser?

What Are the Standard Dresser Dimensions? A dresser is defined as a piece of furniture with six, seven or even nine drawers that is roughly waist-high and wider than it is tall or deep. The typical, rectangular dresser usually measures about 60 inches wide, 20 inches deep, and 30 inches tall.

How are dresser dimensions measured?

Measuring A Dresser Height: The vertical measurement of the cabinet- from floor to top. 2. Depth: The front to back of the unit.

What is typical depth of drawer?

Depth: Standard depths are 14-inches, 16-inches and 20-inches. Height: The height of the drawer refers to the height of the drawer face. The actual height of the box is usually less. Standard heights are 5-inches, 7.5-inches, 10-inches and 12-inches.

What is the standard size of a chest of drawers?

Although there is no standard size for a chest of drawers, the most common size is 38 inches wide. A chest of drawers this size is small enough to fit in most bedrooms, but large enough to have ample storage space.

What is the depth of a bedroom dresser?

A standard dresser has between six and nine drawers, is around waist tall (26″ – 44″), is 36″ – 60″ wide, and is 16″ – 20″ deep.

What are the dimensions of a chest of drawers?

How big are dressers? Dressers come in a large range of sizes to meet varied storage demands, but dressers commonly have overall depths between 18”-24” | (46-61 cm), heights between 30”-50” (76-127 cm), and widths between 30”-74” (76-188 cm).

How do you measure the depth of a drawer?

Begin by measuring along the bottom floor of the drawer at the back edge, middle, and front edge. Check for variations across the height of the drawer as well. Take the smallest of these measurements. Repeat this step for the depth measurement on the left edge, middle, and right edge across the floor and the height.

How do you measure depth?

Commonly abbreviated as D, depth is a measurement of how far back a three-dimensional object is. For example, measurements of an object, such as a computer monitor, are commonly measured as (D x W x H), short for Depth by Width by Height. In the illustration, the Z-axis is the depth.

How is cabinet depth measured?

2) Measure Depth. Measure from the back of the cabinet to inside the closed door. Back of the cabinet. Some cabinets have a block of wood or there may be electrical wiring, this will affect fit.

Article first time published on

How do you measure a set of drawers?

Open the drawer all the way and remove its contents. Use a measuring tape to measure the floor of the drawer; measure from the left to the right and from the back of the drawer to the side closest to you. Note that drawers may not be built on a straight axis, so measure at the middle and ends to cover all ground.

What are the dimensions of a nightstand?

Nightstands are usually square and come in pairs: one for each side of the bed. An average nightstand measures around 20″ wide and 20″ deep. The height of the nightstand should be equal — or close to — the height of your bed frame and mattress so that the pieces align properly.

What's the difference between a chest of drawers and a dresser?

First, you should know the difference between a chest of drawers and a dresser. … However, a dresser is usually wide and short, while a chest of drawers is narrow and tall. Dressers are meant to provide a space you can dress in front of – the top serves as a table to place clothes and provides space for a mirror.

How big should dresser drawer be?

Dresser drawers should be no more than 36 inches wide. Specifically, states Squidoo.com, a “standard size pine chest of drawers” is typically sized in either “17-inch width, 24-inch width, 30-inch width or 36-inch width” drawers.

What is a triple dresser?

noun Furniture. a dresser having three drawers across for most of its height.

What does depth mean in furniture?

Depth (Back to Front): The distance or length it comes out from the wall and into the room. Height (Bottom to Top): The length starting from the floor and going to the top of the piece.

What is an example of depth?

Depth is defined as the distance from top down or front to back, or the intensity of color or sound. An example of depth is a swimming pool being six feet deep. An example of depth is the darkness of a purple dress. The quality or condition of being deep; deepness.

Is depth a length or width?

As nouns the difference between width and depth is that width is the state of being wide while depth is the vertical distance below a surface; the degree to which something is deep.

How deep should drawer boxes be?

Allow at least 1/4” of clearance above and below the drawer, giving you a height of 5-1/2” (6” minus 1/4” at top and 1/4” at bottom). Your drawer box should be 17” wide, 5-1/2” tall and 22” deep.

How deep should clothes drawers be?

Drawers for folded clothes should be set at a minimum of 18” (45.7 cm) with deeper drawers for multiple rows of folding clothing at a depth of 24” (61 cm). Deep drawers are consistent with standard closet depths 24” (61 cm).

Does cabinet depth include door?

The standard size of a base cabinet is 34.5 inches tall without the countertop and 36 inches with the countertop. … If the cabinet is a full height base cabinet (one that only includes a door), that door is 30 inches tall. As far as depth goes a standard base cabinet is 24 inches deep.

What does depth of a cabinet mean?

The depth for base cabinets is the distance from the outer edge of the cabinet to the wall. This means less space inside than the actual number of inches you choose. If you had a deeper cabinet than 24 inches, it would be difficult to reach the back or plug-in appliances. Depth, Including Countertops- 25-26 inches.

How do you measure the depth of a shelf?

Measure In Easy Steps: Measuring underneath of the cabinet is easier, but make sure to keep the measuring tape parallel with the front edge. Measure the depth of the “floor” of the cabinet. This will typically be a little deeper than the upper shelves. Measure the depth of the upper shelves.

How thick are drawer slides?

Light duty slides might be as thin as 1/2″, while heavy duty slides may be over 3/4″ thick. Face frame cabinet slides are easier to install using the specific, optional, face frame brackets. Length sizing is usually simplified by checking manufacturer’s charts, where the drawer size and cabinet depth are both stated.

What size is a bedroom?

The average bedroom size is about 132 square feet while there are bedrooms much larger than even 144 square feet. The basic guideline to bear in mind while allocating space for a standard bedroom is that it should measure at least 120 square feet to comfortably accommodate a full-size bed.

Can a nightstand be lower than the bed?

As a general rule of thumb, the top of your nightstand should be level with the top of your mattress, or about 2-4” taller. It’s much easier for somebody to reach above to grab something when they’re laying on the bed, as opposed to reaching below.

What size are bedside cabinets?

Bedside Tables have average heights between 24”-28” (61-71 cm) to match typical bed heights of 25” (63.5 cm).

Is a chest or a dresser better?

Those with smaller bedrooms will likely opt for a chest of drawers to save floor space. … However, a shorter chest of drawers could double as a nightstand. For those with plenty of space, a dresser may be better. While dressers are bulky, their larger, wider drawers allow you to stow away more clothing.

What is a dresser with a mirror on top called?

A dresser with a mirror attached is called a bureau.

What is bedroom dresser?

A dresser is a staple piece of furniture that can be virtually seen in every bedroom. … In summary, a dresser is low, long and great for those that have enough space in the bedroom. A chest of drawers is tall, narrow and ideal for smaller bedrooms.