Is blueskin a vapor barrier

Impermeable to air, moisture vapor and water, Blueskin® SA is designed to install easily on a variety of prepared substrates.

Is blueskin vapor permeable?

Henry® Blueskin® VP160 is a self-adhered vapor permeable, water resistive air barrier membrane consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical attachment.

Can blueskin be exposed?

Limitations: Blueskin® SA is designed for exposure up to 90 days if necessary to accommodate construction scheduling, but is not designed for permanent exposure to ultraviolet light and should be covered as soon as practical after application.

Is blue skin breathable?

ColourBlueTensile Strength, dry41 lbf / 182 N MD (29 lbf / 129 N CD)Average Breaking Force, dry127 lbf / 565 N MD (91 lbf / 405 N CD)

Does blueskin stick to concrete?

Features: SBS modified membrane can be applied in temperatures as low as -12ºC. Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and plywood. Impermeable to air, moisture vapor and water.

How long can vp100 be exposed?

Maximum exposure not to exceed 150 days. Excessive moisture in substrate or laps can inhibit adhesion or result in loss of adhesion prior to installation of cladding.

Can you use blueskin on a roof?

Blueskin® PE200HT is specifically designed to provide an exceptionally high temperature and performance roofing underlayment. It is designed to be adhered directly to roof decks or certain insulation panels prior to the application of finished roof coverings including architectural metal, shingles or tile.

Who owns Henry blueskin?

Henry Company Acquired by Investors Led by Graham Partners. EL SEGUNDO, Calif., Jun.

Where is Henry blueskin manufactured?

MANUFACTURER: HENRY COMPANY Headquartered in El Segundo, California, Henry Company specializes in integrating air/vapor barrier, roofing, and waterproofing systems, with the mission of improving the livability and sustainability of structures for their owners, occupants, and the environment.

How long can blueskin be exposed UV?

We finally got the material to finish the job but we are over 150 days of exposure now which according to VP100 spec sheet is the max amount of exposure.

Article first time published on

What temperature can you apply blueskin?

Protect from weather or store in an enclosed area not subject to heat over 120 °F (49 °C). In cold weather, it is recommended to warm rolls to 50 °F (10 °C) or above prior to application to assure adhesion to substrate.

Can you apply blueskin in cold weather?

Blueskin® Primer is the preferred primer in the industry for self-adhered membranes. … This membrane is designed for cold weather applications, which can be applied down to temperatures of -12°C!

Can you use blueskin on foundation?

Repair any damage to foundation and apply two coats of parging. Add a footing bevel where the foundation wall meets footing. Apply AquaBloc primer and apply BlueSkin waterproof membrane. … Backfill and grade property away from foundation.

Can I paint over blueskin?

Hi, if you’re going over blueskin, use the Liquid Rubber Multi-Purpose Primer first before applying the Liquid Rubber RV Roof Coating. Liquid Rubber offers great technical support, application info and videos.

Can blueskin be used indoors?

WP200 is an ideal membrane for use in interior applications such as mechanical rooms, laboratories and wet-rooms. … WP200 must be clean of oil, dust and excess mortar.

Is blueskin heat resistant?

Store rolls on end in original pallets or elevated platform. Protect from weather or store in a dry enclosed area not subject to heat over 120 °F.

What is high temperature underlayment?

This self-adhering “self-stick” roofing underlayment is composed of a cool white, non-slip, cross-laminated, high density polyethylene film laminated to a high temperature rubberized asphalt adhesive system. …

What is high temp ice and water shield?

Ice & Water Shield® HT is formulated with a proprietary adhesive with temperature resistance of up to 260°F. The membrane forms a watertight bond to the roof deck, and seals around fasteners of the primary roof covering and thus maintains the waterproof integrity of the roof deck.

Does blue skin have an R value?

Also, Blueskin® VP100 is self-adhered, allowing it to bridge the gaps of the sheathing. … Blueskin® VP100 will help a home’s insulation perform at its intended R-Value while contributing to reduced energy costs and eliminating uncomfortable air drafts.

What can I use to waterproof my basement walls?

DO apply a masonry waterproofing product to bare interior basement walls. If your foil test showed that water is soaking through your basement walls and leaving them wet, seal the interior of the walls with a high-quality waterproof paint, such as DRYLOK White Extreme Waterproofer (available from Home Depot).

Who owns Henry company?

–(BUSINESS WIRE)–Carlisle Companies Incorporated (NYSE:CSL) today announced that it has entered into a definitive agreement to acquire Henry Company (“Henry”), a leading provider of building envelope systems, from affiliates of American Securities LLC, a leading U.S. private equity firm.

How long is a roll of blue skin?

36″ x 50′ Roll Weather Barrier.

How many square feet is a blueskin roll?

4-ft x 100-ft. 400 Sq Ft.

Does blueskin stick to wood?

This next generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry/Bakor Blueskin VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.

Can you put blueskin on wood?

Acceptable substrates are precast concrete, cast-in-place concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and wood.

What is blue skin wrap?

Blueskin VP is a patented, fully-adhered, peel-and-stick exterior envelope barrier for residential and commercial buildings that is superior to all mechanically attached technologies when it comes to preventing air and water intrusion.

Does blueskin require primer?

board, DensGlass Gold® and metal surfaces. Blueskin® Primer is the primer of choice on above grade applications of self-adhered membranes where a quick setting, aggressive tack, solvent based primer is required. Blueskin® Primer Ultra is ideal where a very fast drying primer is required.

How do you remove blue skin primer?

1. The stripper will have hardened, so you can work in any order you’d like. …
2. You may need to use a wire brush after you scrape porous surfaces, like brick or concrete.
3. This can take a while if you’re removing primer from a larger surface area.

Is blueskin a waterproof membrane?

Blueskin® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a high-performance waterproofing barrier.

How do you seal the Blueskins?

Prime surfaces with Henry Blueskin® Adhesive, Henry Blueskin® LVC or Henry Aquatac™ Primer as per Technical Data & MSD Sheets and allow to dry, press membrane firmly into place, overlap minimum 2” inches (5cm) at side laps and end laps. Promptly roll all laps and membrane to ensure the seal.