How much does it cost for pool resurfacing

The national average cost of resurfacing a pool is $6,500, and ranges from $1,000 to $100,000, including materials and labor. Labor charges vary from $45 to $65 an hour depending on the work involved and the location of the project.

How much does it cost to resurface a 10000 gallon pool?

Re-plastering the interior surface of an average residential in-ground pool (10,000-20,000 gallons or 14’x28′ to 16’x32′ and 3.5′-5′ deep) with standard white plaster or marble-dust plaster (marcite) typically costs $2,500-$5,500, depending on the size, depth and shape of the pool, and local rates.

How often do you need to resurface a pool?

How often is it necessary to resurface a pool? It varies depending on the type of pool, with plaster or cement pools needing to be resurfaced every 3-7 years while fiberglass pools can sometimes go as long as 15-30 years.

How long should pool resurfacing last?

To determine how often your pool needs to be resurfaced will depend upon when it was installed and with what material it was made. Cement and plaster, for example, usually require resurfacing every three to seven years. Whereas more durable material can last as long as fifteen years before such a job is required.

How much does a pool Replaster cost?

The typical cost to have a pool replastered is between $4 and $7 per square foot. Assuming an average pool size of 16 feet by 32 feet, 4 feet deep on the shallow end and 8 feet on the deep end, that’s total of 1,088 square feet. If the cost is $5 per square foot, replastering would cost $5,440.

How do I know when my pool needs resurfacing?

1. Plaster Flaking or Peeling. Maybe you’ve noticed the plaster is peeling along the steps or floor of your pool or spa. …
2. Surface Stains. …
3. Roughness. …
4. Check Cracks. …
5. Plaster Discolorations. …
6. Structural Cracks. …
7. Rust Stains. …
8. Loss of Pebbles.

How much does it cost to Replaster an inground pool?

The average cost of replastering a pool can set you back anywhere between $2000 and $8500.

How much does it cost to renovate a concrete pool?

Concrete Pool ProjectAverage Cost RangeRemodel Concrete Pool$10,000 – $60,000 and upRemove Concrete Pool$5,000 – $15,000Fill in Concrete Pool$3,500 – $5,000Replace Concrete Pool with Fiberglass Pool$55,000 – $95,000 and up

What happens if you dont resurface your pool?

If you don’t resurface the pool, which is necessary because it is always exposed to weather, cracks and an unevenness in the pool surface will occur and this could lead to algae stains, water leaking and injuries from the uneven surface.

How much does it cost to resurface a concrete pool deck?

Resurfacing also adds strength to your surface by covering and bonding any cracks in your deck. With resurfacing costs starting around $3 to $5 per sq. ft., placing an overlay on your pool deck could save you money and time.

Article first time published on

What is the life expectancy of an inground pool?

You can expect a concrete swimming pool to last about 25 to 40 years, average 30 years. The quality of construction and maintenance, specifically maintaining balanced pool chemistry, are the variables that affect pool lifespan the most.

How much more expensive is Pebble Tec than plaster?

Thanks to its relatively simple look and material makeup, pool plaster is a lot less expensive than Pebble Tec®. White plaster costs about $4 for every square foot of pool surface. Meanwhile, a pebble finish, like Pebble Tec® or Pebble Sheen®, can easily cost $10 or more per square foot.

How often should I Replaster my pool?

When it comes to your pool, you should set aside a budget to replaster your pool. Ideally, you should white coat your pool once every ten years. In this time, you should have more than enough money to make fixes and give your pool some welcome updates.

How much does resurfacing a fiberglass pool cost?

Fiberglass Pool Resurfacing Cost Fully resurfacing fiberglass pools costs an average of $6,500 per 1,000 square feet. If, however, you just want a new gel coat with a painted topcoat, which is enough to cover minor scratches and dings, you’ll pay around $1,000 to $1,200.

How long does it take to resurface pool?

How long does it take to resurface a pool? Pool resurfacing usually takes about 5-7 days to complete. The pool resurfacing process can be hindered by weather, however, and may take up to 14 days in certain cases.

How does pool resurfacing work?

Pool resurfacing involves preparing the existing pool for a new surface coat by hydro blasting, sandblasting then bond coating, or chipping away the old surface. Next, a polished finish is applied, or a finished coat made of glass beads, glass, exposed pebble, quartz, a polished finish, or plaster is added.

What happens when you resurface a pool?

Pool resurfacing is the process of removing the old pool surface (tiles, pebbles, plaster, etc.) and applying a new one. It can also include fixing any cracks, blisters, and other damages that may have appeared on the pool’s floor and walls over the years.

Can I Replaster my own pool?

It will chip and wear away more easily, and when it does, you will need to repair it. If there’s a reason to use paint over plaster, it’s that the application process really is a lot easier. While you could paint on your own, replastering is something that only the most industrious homeowners take on.

Will resurfacing pool fix leaks?

Resurfacing can repair problems like cracks and wearing, while also enhancing and updating your pool’s appearance. While not needed as often as other services, resurfacing should still be on your list of pool maintenance tasks.

How much does it cost to epoxy a pool?

Epoxy. Epoxy paint is another popular finish choice for fiberglass pools and other options such as concrete. It can take a few weeks to cure but produces a smooth, beautiful coating that looks good in any swimming pool. Epoxy is also cheaper than many other finishes, costing around $1,500 per application.

Can you retile a pool without plastering?

​Yes. The thinset and grout used to install the new tile will fall onto the pool surface. … The pool will likely have to be pressure washed and possibly acid washed after the retile if you are not replastering the pool as well. Expect additional charge for the cleanup.

Can you paint your pool plaster?

In addition to draining the pool, you need to degrease the surface using TSP scrub, acid etch the plaster, then wash and scrub with TSP again before you can paint. … You then apply a coat of paint with long, even strokes, wait six hours, and apply another coat.

What pool upgrades are worth the money?

1. Salt Water Chlorinator – Swimming Pool Purifier Extraordinaire. …
2. Color LED and Fiber Optic Pool Lights – Swimming Pools That Shed Light on Backyard Nightlife. …
3. Aggregate Finish Pool Plaster – A Durable Surface That Sparkles from Top to Bottom.

Is it expensive to reshape a pool?

Changing the shape of your pool starts at $30,000 for a vinyl pool and $60,000 for a concrete (gunite) pool. This is a highly invasive procedure that requires replacing the entire pool lining. The total price includes installation and materials for a new pool, plus the labor required to move earth.

How often do concrete pools need resurfacing?

To put it into perspective, most concrete swimming pools need resurfacing every ten to fifteen years. If you have a vinyl liner, you will need to replace it in the same amount of time. Because of sun, chemicals, weather and basic usage, your concrete pool deck may need resealing more frequently.

Is resurfacing concrete expensive?

The average cost to resurface 100 square feet of concrete is $400. Less expensive projects can run as little as $300 while more expensive ones are about $500. The price per square foot can range between $3 and $5.

Is concrete overlay expensive?

Concrete Overlay Cost for Floors, Patios & More. A basic floor overlay runs from $3 to $7 per square foot, which is comparable to high-end carpet or tile. The price can increase to $20 or more per square foot depending on textures, embeds, saw cuts, or other design elements that are added to the design.

Is concrete overlay a good idea?

They’re Strong and Durable Concrete is one of the strongest materials available for your floors. The decorative overlay consists of stain or pigments, so the floor remains as strong as ever. The floor coatings themselves are resistant to most damage, including stains and etching from chemicals or heavy equipment.

Which pool lasts the longest?

It generally takes between three and 12 weeks to install a concrete pool. That’s longer than other types, but concrete is considered the strongest, most durable type of pool. And unlike other in-ground pools, existing concrete pools can be rebuilt, refinished, enlarged, or updated.

What inground pool last the longest?

Pools with vinyl liners will last more than 20 years, as long as you replace your liner every 6-12 years. Concrete pools have exceptional longevity, but you need to resurface the concrete every 10 years or so. Fiberglass pools have the longest lifespans of any in-ground pool, often easily surpassing 30 years.

What is the easiest type of pool to maintain?

The smooth, non-porous surface of a fiberglass pool makes it very difficult for algae to gain a foothold. Consequently, it makes it very easy for you to keep it clean. Corrosion resistant. Fiberglass resists corrosion, so it is an excellent option for popular salt sanitation systems.