How do you mix Drylok

Both DRYLOK® Fast Plug® and water for mixing should be at room temperature. Mix 3 parts DRYLOK® Fast Plug® and 1 part water thoroughly until you achieve a putty or heavy troweling consistency. This mixture will set in 3 – 5 minutes.

How much does a gallon of Drylok cover?

A. Both DRYLOK® Original Masonry Waterproofer and DRYLOK® Extreme Masonry Waterproofer cover 75 – 100 square feet per gallon, and DRYLOK® Floor & Wall Masonry Waterproofer covers 90 – 100 square feet per gallon, depending on the porosity of the surface.

Can Drylok be thinned?

Stir DRYLOK® Extreme Masonry Waterproofer thoroughly before and during application — do not thin. Apply the first coat to bare masonry with a three-quarter-inch nap roller, a DRYLOK® Brush or a quality nylon bristle brush. … If using a roller, back brush the first coat to fill all pores and pinholes.

What happens if you put Drylok over paint?

DRYLOK loses its waterproofing ability when applying the chemical over painted walls or flooring containing latex or oil-based paint. … You can still apply DRYLOK over latex or oil-based paint but the chemical will not prevent moisture from seeping in through the concrete wall or flooring.

How many coats of Drylok should I do?

Just as with a thorough paint job, proper application of DRYLOK Masonry Waterproofer requires two coats. Dry times vary based on temperature and humidity, but it typically takes at least four hours for the product to dry.

How many sq ft does a 5 gallon bucket of Drylok cover?

5 gallon can. Coverage 375-500 Sq. Ft.

Should I use Drylok on my basement walls?

DO NOT PAINT YOUR WALLS, even with Drylok or waterproofing paint. … Also, do not attach insulation directly to the foundation walls. It behaves as a moisture trap and can also hide structural problems and cracks in the foundation.

How do I prepare my basement for Drylok?

DRYLOK paint should only be applied after you prep walls by cleaning them with a wire brush, removing salt deposits and sealing cracks and holes. Paint the walls when the temperature is at least 50 degrees Fahrenheit, optimally during a rain-free period when humidity levels are not high.

Can you paint Drylok fast plug?

DRYLOK® Fast Plug® may be painted when set with DRYLOK® Original Basement & Masonry Waterproofer, DRYLOK® Powdered Basement & Masonry Waterproofer or DRYLOK® Concrete Floor Paint. For Inactive Leaks, Patching, Anchoring: Thoroughly soak the area to be patched.

What's the difference between Drylok pro and Drylok extreme?

DRYLOK Pro offers mold and mildew resistance, stops water under hydrostatic pressure and water entering by wind driven rain. … The color selection is more extensive than that of DRYLOK Extreme. DRYLOK Pro was formulated to accept a larger spectrum of color. All of UGL DRYLOK products seals against Radon Gas.

Article first time published on

How long does Drylok need to dry before rain?

DRY TIME: To touch: 30 minutes • To recoat: 3 hours • Top coat with latex paint: 24 hours Note: Maximum cure and dry time will be prolonged when slightly humid and damp, cool conditions prevail.

How long does Drylok take to cure?

A. DRYLOK Latex Masonry Waterproofer can be used to successfully waterproof fish ponds as long as the product is allowed to cure for the recommended 5-7 days. This cure time is necessary to ensure that all the volatile “processing aids” have completely evaporated from the dry film.

Can you spray drylok extreme?

Latex Base DRYLOK® Masonry Waterproofer can be applied by spraying to exterior and interior masonry structures, providing certain precautions are followed. The key to obtaining satisfactory waterproofing is to be sure a continuous film of waterproofer is applied.

Can you apply drylok with a roller?

Do not thin DRYLOK® Extreme Masonry waterproofer before and during application. To apply the first coat to bare masonry, use a three-quarter-inch nap roller, a DRYLOK® brush or a quality nylon bristle brush. If you use a roller, brush the first coat to fill all the holes. …

Should I use Kilz before Drylok?

Yes, using a good quality 100% acrylic latex paint. DRYLOK® Masonry Waterproofer can also be tinted for a decorative finished coat. So it seems clear that you should put the Drylock on first and then any other paint, including the anti-mold primer.

Will Drylock prevent efflorescence?

A. United Gilsonite Laboratories manufactures a product called DRYLOK® Etch. While DRYLOK® Etch will remove efflorescence and help prevent it from reoccurring, understand that efflorescence comes from salt deposits found in the block itself and can reoccur at any time.

Can you paint Drylok on wet walls?

DryLok is a useful coating which can be painted onto wet basement walls to protect them from damage. … It is available in powdered form and ready mixed, which can simply be painted straight onto the wall. DryLok is not only suitable for wet basements, but it’s also commonly used in birdbaths and fish ponds.

What is the best way to seal cinder block walls?

Paint the cinder block wall with a thick coat of masonry waterproofing paint, pushing paint into cracks and crevices of block. A paint roller or brush made specifically for masonry is best. Allow to dry overnight or for a minimum of 12 hours between coats.

Can you mix acrylic paint with drylok?

Registered. yup. just mix in plain old acrylic paint with the drylok in small portions. It can be a really versatile way to coat different things for vivariums.

Does hydraulic cement expand?

First, this type of cement will cure under water, which means that you don’t have to dry out the leak before stopping it. Second, is that hydraulic cement expands as it cures, so it tightens up cracks and seals the gaps around pipes.

How do you remove drylok from basement walls?

First is your proposed plan. Second is attach a diamond grinding wheel to a variable speed angle grinder and use a fan for ventilation. This will generate lots of dust. Third is to simply scrape off the loose paint and recoat with drylok after washing the staining off with a mold removal cleaner.

Can you seal basement walls from the inside?

Apply a masonry waterproofing product to the walls Seal/coat the interior of the walls with a suitable masonry waterproof product. When the paint dries, the sealant forms a watertight bond to stop water from seeping through. This is how you can waterproof your basement walls from inside.

What is better than Drylok?

ft. per gallon of coverage, Sani-Tred can waterproof larger surfaces using less material and lowering your costs. Not only does Sani-Tred actually waterproof your basement, it has better coverage for less money in the long run. Drylok appears to be the more economical choice.

Which Drylok should I use?

For maximum protection, I opted for DRYLOK Extreme. Recommended for the most demanding conditions and capable of resisting the hydrostatic pressure equivalent to a 33-foot-tall wall of water, DRYLOK Extreme does what other, broadly similar products do, only better.

Can you use Drylok on cement board?

In many areas of your home, tiling over damp areas requires the placement of a waterproof membrane, such as cement board. Since Drylock acts as a waterproofing agent, your surface is ready for the adhesive coat and the tiles. … Using adequate amounts of these products will help ensure a durable tile finish.

Can you use Drylok for swimming pools?

DRYLOK® is ideal for interior/exterior, above/below grade masonry including cinder and concrete block, stucco, brick, and bare concrete swimming pools. Features Flexible Encapsulated Polymers for a beautiful, smooth waterproof finish.

Does Drylok feed mold?

The chemical makeup of Drylok paint is a particular food source that mold actually likes (mold also grows on wood and many other similar surfaces as those are food sources as well) so the mold has food in plenty if Drylok is present.

Do you need primer with Drylok?

The DRYLOK Difference Although several types of paint can be used on brick, masonry or cinder blocks, they usually require application of a primer to help the paint adhere. DRYLOK, on the other hand, serves as it own all-in-one paint and primer.

Does Drylok Harden?

Registered. The finish did have a rougher texture which I was going for. I added sand as well to some spots mixed in with paint. It dries hard.

Can you use a spray gun for drylok?

ByBrittney It is possible to spray drylok, but not with a light duty airless or a homeowner. You need to remove the filters even after you have used a stout pump like the Graco 733. As soon as the paint is sprayed, it needs to be rolled back to work the pores into it.

Can you spray drylok with an airless sprayer?

You can spray drylok but not with a homeowner or light duty commercial airless. It takes a stout pump like a Graco 733 and even then you need to remove the filters. When sprayed it still needs to be backrolled to work the paint into the pores.