How do top fix toilet seats work

Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.

How does a top fixing toilet seat work?

Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.

How does a slow closing toilet seat work?

A slow close toilet seat is basically one that closes on its own as soon as you start to push it down. Gravity controls it but special, tensioned hinges control the gravity. This is where theslowpart comes in so there’s no slamming down. To get the seat on its way to closing, even just a light tap will do the trick.

Can you fit a top fix toilet seat to any toilet?

Replacement toilet seats can usually be adjusted to fit older or non-standard toilets; however, the seat must be supported at the contact points or hinges. Most toilet seats are an oval shape, although some may be more of a contemporary square or D-shape.

How do I stop my toilet seat from sliding sideways?

1. Lower the seat and locate the two screw covers at the back of the seat. …
2. Put the flat-head screwdriver in the screw slot and hold it steady while you unscrew the nut from underneath the bowl. …
3. Remove the nut and bolt and take the seat off the bowl. …
4. Insert the screw back in the holes.

Why is my soft closing toilet seat not working?

Soft-close toilet seats work because they have a special type of hinges that make the toilet seat close on its own very slowly and quietly. … If your soft-close seat isn’t working like it used to and you can’t adjust the hinges, you might have to fix it by replacing the hinge dampers with a new set.

How do you remove a broken bolt from a toilet seat?

If the bolts or nuts are plastic, they can’t corrode and will come off easily. Simply pry open the cover behind the seat to expose the bolt’s head. Unscrew the bolt with a pliers or a screwdriver while you hold the nut underneath with the pliers.

Why does my toilet seat always come loose?

Toilet seats often wobble because the holes in the toilet-bowl rim are larger than the diameter of the bolts, allowing movement that eventually makes the nuts loose. Tightening the nuts seldom works very well. … Another approach is to install self-adhesive rubber washers between the lid and top of the toilet bowl.

How long do slow close toilet seats last?

How Long A Soft Close Toilet Seat Last? Soft Close Toilet Seats generally last for 5 or more years. The slow-close action on the toilet seat can last up to 30,000 to 50,000 repetitions if they are properly maintained and cleaned.

Do you have to caulk around a toilet?

Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It’s actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?

Article first time published on

Do all toilets fit the same?

For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. … If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.

Can you glue a toilet to the floor?

Today the method most commonly used by plumbers to fix a toilet pan to the floor is with clear sanitary grade silicone. … The purpose of the soap and water solution is to avoid the excess silicone sticking to the floor and also your fingers as you carefully remove the excess silicone.

How many sizes of toilet seats are there?

As we said, toilet seats come in two sizes: round and elongated. Every toilet seat is one of these two, indicated on its packaging.

Does toilet seat have to match toilet?

As a general rule, match elongated seats to elongated toilets and round-front seats to round-front toilets. However, before you make your final choice, you will want to be certain that your toilet seat is compatible with your toilet in terms of size, style and color.

What type of toilet seat is best?

1. Kohler K 4636 Cachet Toilet Seat. …
2. Bemis 7800 TD-G000 Plastic Toilet Seat. …
3. TOTO SS-154#01 Elongated Toilet Seat. …
4. Delta Faucet Morgan Slow-close Round Toilet Seat. …
5. Brondell-L60EB Luma-Warm Heated Toilet Seat. …
6. Mayfair 9601-CP Natural Reflection Veneer. …
7. Mayfair 115EC Toilet Seat.

What is bottom fixing toilet seat?

A bottom fixing is a more traditional style fixing, with two bolts that fit down into your pan and are then tightened from underneath. Top fixing hinges are used when there is no access to the bottom of the pan, like in some back to wall toilets, or modern one-piece style toilets.

How do you install a toilet lid cover?

Place the seat cover onto the toilet so the flap goes inside the bowl. The flap of the toilet seat cover is the middle, circular section. Align the flap so it falls inside the bowl and the outer ring covers the seat of the toilet completely.

How do you open the bolt cover on a toilet seat?

Removing Toilet Bolt Caps A flat-head screwdriver is ideal, especially one with a long handle for better prying, but a metal putty knife or even a kitchen knife will work. Slip the edge of the blade under the cap and pry upward.

How do you remove a metal bolt from a toilet seat?

The metal bolts are part of the toilet seat hinge hardware. Simply unscrew the nut from the attached bolt. Corroded bolts and nuts are harder to detach. To remove the nut from the seat hinge bolt, use a long socket and socket wrench to unscrew the nut.

Can you make a toilet seat soft close?

An all-purpose household lubricant can work wonders on squeaky toilet seats. Apply it to the seat’s hinges, and lift and close the toilet seat a few times to work the product into the hinge. You should notice the squeaking getting quieter each time you move the hinges as the lubricant gets to work.