How do I delete a code on my Kwikset lock

Make sure the door is open.If you have not enabled a programming code, press and release the program button. You will hear two beeps. … Press 2 to delete a user code. … Press Kwikset.Enter the user code you wish to delete. … Enter the user code again.Press Kwikset.

How do I remove a code from Kwikset Smartcode 910?

Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.

How do I hard reset my Kwikset lock code?

1. Make sure the door is open and unlocked.
2. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
3. Press and release the program button. You will hear one short beep.

How do you change the 4 digit code on a Kwikset lock?

Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 – 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once.

How do you remove a code from a Kwikset lock 909?

Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.

How do you remove the code on a Kwikset lock 913?

1. Keep door open. Press Program button once.
2. Press Checkmark symbol once.
3. Press Lock symbol once.

How do you change the code on a Kwikset Halo?

1. Open the Kwikset app.
2. Tap the Menu icon.
3. Select Account Settings.
4. Select Account.
5. Select Change Password.
6. You will be prompted to enter your old password, then the New Password fields must be filled out.

How do I change the code on my Kwikset SmartCode 909?

To set a code for the second user, press the SmartCode “Program” button twice to program a security code for the second user, such as a relative. Enter a four to eight digit security code on the outside electronic lock keypad and press the “Lock” button again.

How do I reset my halo lock?

Hold down the black button in the center of the lock, just above the LED light, while lowering the battery pack back into its slot. 4. Keep holding down the button for 30 seconds, or until the light flashes red.

What is the master code for Kwikset lock?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

Article first time published on

How do I factory reset my Kwikset 910?

1. Remove the batteries.
2. Press and hold the lock button on the keypad.
3. Place the batteries back in (while still holding the button)
4. The lock will beep three times over the course of 15 seconds or so. After the 3rd beep release the button.